Acceptable registrations in the queue through June 3 at 5:00p ET have now been activated. Enjoy! -M.W.
Terms of Use have been amended effective October 6, 2019. Make sure you are aware of the new rules! Please visit this thread for details: https://www.mibuzzboard.com/phpBB3/view ... 16&t=48619
Terms of Use have been amended effective October 6, 2019. Make sure you are aware of the new rules! Please visit this thread for details: https://www.mibuzzboard.com/phpBB3/view ... 16&t=48619
WKBD Testing on RF34
WKBD Testing on RF34
Saw last night around 1030pm WKBD had a test pattern on RF34 getting ready for the move from RF14.
F**K Trudeau and F**K CBC !!!!
Re: WKBD Testing on RF34
I did a rescan and didn't pick anything up on 34. But good to know they are testing.
Re: WKBD Testing on RF34
I hope when WKBD moves the RF to Channel 34 the signal will be better than RF 14.
Re: WKBD Testing on RF34
For me it has been the opposite. The lower the RF channel the more stable the signal is for me. So I am a little worried that WKBD might start having issues in bad weather and high winds after it moves. I am really looking forward to 4, 7, and 62 moving during Phase 8.
Re: WKBD Testing on RF34
There is an entirely new antenna on the candelabra for RF34. WKBD's antenna on 14 is a side mount below the platform.szmigiel wrote: ↑Sun Apr 21, 2019 8:49 amFor me it has been the opposite. The lower the RF channel the more stable the signal is for me. So I am a little worried that WKBD might start having issues in bad weather and high winds after it moves. I am really looking forward to 4, 7, and 62 moving during Phase 8.
Re: WKBD Testing on RF34
That's good to hear. For me in Shelby Twp I never had any issues on 50, it was one of the more reliable stations for me. Which is why I was happy that Comet moved to 50-2 from 19.
-
- Posts: 45
- Joined: Wed Apr 17, 2019 8:49 pm
Re: WKBD Testing on RF34
When does WKBD suppose to cut off RF 14 and move to RF 34?
Re: WKBD Testing on RF34
By June 21st, I am sure they will have a scrolling warning on screen before the switch is made.